100 L Electric Boiling Pan – Indirect Heating
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. AISI 304 stainless steel cooking container with 15/10 thickness, AISI 316 stainless steel bottom with 20/10 thickness. Jacket with bottom and walls of A ISI 304 stainless steel, bottom with 20/10 thickness, walls with 15/10 thickness. Indirect type heating with low-pressure steam (0.5 bar) generated inside the jacket through armored resistance from Incoloy equipped with a safety thermostat. Hot and cold water taps on the worktop with an articulated spout for filling and washing the container. 2” draining tap of chromed brass with an athermic handle. Mechanical gauge with a jacket pressure indicator. The power supply is regulated by a 3-position switch. Separate control for temperature regulation. Pilot light and temperature indicator light. Double-walled lid.
100 L Gas Boiling Pan With Indirect Heating
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. AISI 304 stainless steel cooking container with 15/10 thickness, AISI 316 stainless steel bottom with 20/10 thickness. Jacket with bottom and walls of AISI 304 stainless steel, bottom with 20/10 thickness, walls with 15/10 thickness. Indirect type heating with low-pressure steam (0.5 bar) generated inside the jacket through tubular stainless-steel burners with optimized combustion, with thermocouple safety valve, and a protected pilot flame. Electric ignition. Hot and cold water taps on the worktop with an articulated spout for filling and washing the container. 2” draining tap of chromed brass with an athermic handle. Temperature regulation by means of a handle tap to adjust the water level. Double-walled lid.
2-Burner Gas Cooker on Cabinet
2-Burners Gas Cooker With Cabinet
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with an all-brass body. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life.
2-Burners Gas Stove
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with an all-brass body. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life.
2-Zone Infrared
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel and Scotch Brite finishing. Pyro Ceram top with a thickness of 6 mm Electrical resistances able to reach high temperatures (500 °C) to heat the cooking top with irradiation. The zones are marked with proper serigraphs that allow the proper positioning of the pans. After switching off each zone, a light signals residual heat up to 60 °C to safeguard the operator.
2-Zone Infrared Top With Cabinet
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Pyro Ceram top with a thickness of 6 mm Electrical resistances able to reach high temperatures (500 °C) to heat the cooking top with irradiation. The zones are marked with proper serigraphs that allow the proper positioning of the pans. After switching off each zone, a light signals residual heat up to 60 °C to safeguard the operator.
3-Burner Gas Cooker on 1/1 Gas Oven
Stainless steel AISI 304 worktop and front panels. Nickel-plated cast-iron high-power burners with a single or double crown, guaranteed for life, activated by a valve cock with a safety thermocouple and pilot light. Chromium-plated grates. The drip pan is removable to enable maintenance and cleaning to be carried out easily and efficiently. Stainless steel static gas oven with 3 levels of rack guides for 1/1 GN shelves/trays. Stainless steel outer and inner door. 20/10 stainless steel heat-resistant door handle. Adjustable feet. Standard: 1 anti-tilt oven shelf.
4-Burner Gas Cooker on Cabinet
Worktop and front panels are made of AISI 304 stainless steel. Inside AISI 430. Cast iron burners with thermocouple safety valve and protected pilot flame with regulation up to 3,5 kW on the 80 mm version, regulation up to 7 kW on the 108 mm version, and regulation up to 12 kW on the 130 mm version. Press ed trays from AISI 304 stainless steel.
4-Burners Gas Cooker on 2/1 GN Gas Oven
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass burner cap, attached with a waterproof seal to the deep drawn worktop in AISI 304, with thermocouple safety valve and protected pilot flame. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life, activated by a valve cock. Gas oven with a self-stabilized flame burner positioned under the steel ribbed base and adjustable thermostat from 160° to 280°. Oven chamber from AISI 430 with 4-level supports and internal, pressed and ribbed door from stainless steel. Stainless steel Internal chimney and burner from AISI 304 stainless steel. High resistance and double-pressed handles from AISI 304 stainless steel of 20/10 thickness.
4-Burners Gas Cooker with Cabinet
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with an all-brass body. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life.
4-Burners Gas Stove
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with an all-brass body. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life.
4-Burners Powered Gas Stove
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with h all-brass body. Compact high-efficiency 10kW triple-hole burners with 120 diameters. Guaranteed for life.
4-Zone Infrared Top With Cabinet
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Pyro Ceram top with a thickness of 6 mm Electrical resistances able to reach high temperatures (500 °C) to heat the cooking top with irradiation. The zones are marked with proper serigraphs that allow the proper positioning of the pans. After switching off each zone, a light signals residual heat up to 60 °C to safeguard the operator.
403
Form finisher for the combined shirts and garment finishing with brilliant results and extremely simple use. Pneumatic closing of the front paddle, with steam-heated counter-paddle. Manual trolley for the alignment with the shirt hem, two manual side clamps with pneumatic closing. Air-operated sleeve clamps. Manual rear clamps. Manual collar locking system. The form finisher can be easily operated to press jackets and coats, etc. Cycles controlled by microprocessor, possibility to operate manual cycles.
Available options:
- Built-in electronic boiler
- Water spray gun with support
- Electric iron for touch-ups.
- Pneumatic sleeve tensioning clamps with oval shaped sleeve locking device
404
Shirt and universal form finisher. Thanks to its functionality and upgraded technical features, excellent finishing results are obtained not only on shirts, white coats and uniforms but also on traditional garments, with a simple reset of the machine. Pneumatic front paddle closing device, with steam heated and vacuum counter-paddle. Manual collar blocking system New pneumatic trolley for fast and accurate alignment with the shirt hem, two air-operated side clamps and one air-operated rear clamp. Working cycles managed by microprocessor and chance to work with manual cycles.
Model 404 is also available in the fully electric version: 404-E New fully-electric version of model 404. It’s the ideal solution for companies with no central boiler and for those who desire a simpler installation. It has the same features as the steam version, with the exception of the heat exchanger which is electric, and the counter-paddle which is electrically heated and has vacuum. This unit has NO steam.
Available options:
- Built-in electronic boiler.
- Water spray gun with support.
- Electric iron for touch-ups.
- Water spray gun
6-Burner Gas Cooker on Cabinet
Worktop and front panels are made of AISI 304 stainless steel. Inside AISI 430. Cast iron burners with thermocouple safety valve and protected pilot flame with regulation up to 3,5 kW on the 80 mm version, regulation up to 7 kW on the 108 mm version, and regulation up to 12 kW on the 130 mm version. Pressed trays from AISI 304 stainless steel.
6-Burners Gas Cooker on 2/1 GN Gas Oven
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass burner cap, attached with a waterproof seal to the deep drawn worktop in AISI 304, with thermocouple safety valve and protected pilot flame. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life, activated by a valve cock. Gas oven with a self-stabilized flame burner positioned under the steel ribbed base and adjustable thermostat from 160° to 280°. Oven chamber from AISI 430 with 4-level supports and internal, pressed and ribbed door from stainless steel. Stainless steel Internal chimney and burner from AISI 304 stainless steel. High resistance and double-pressed handles from AISI 304 stainless steel of 20/10 thickness.
6-Burners Gas Cooker with Cabinet
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass flame spreaders fixed liquid-tight to the AISI 304 deep-pressed steel top, equipped with a safety thermocouple and a pilot flame with an all-brass body. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life.
All Steam
Pony offers a wide range of professional irons that meets every kind of iron requirement.
Available models are:
- Senior TT, with patented Triple Touch System is the first electric steam iron with a universal handle, that’s perfectly ergonomic for both right and left-handed operators. The tapered shape of the sole guarantees flawless ironing even on hard-to-reach areas.
- Senior, same features as Senior TT, but with external micro.
- Electronic 170, with electronic control and nickel-plated sole.
- All Steam, completely steam heated, with no heating element nor thermostat.
- Baby, the entry-level iron of the range, simple and solid.
- Baby Professional, with steam control on the handle and hand protection.
- Seam Buster, narrow base with special alloy iron sole, thermos fuse protected armored heating element.
- Hand protection (against rising steam)
- Teflon shoe • Hook for iron suspension
Alternative Solvent Machine
HP & HL 800 Series
Product Overview
Alternative Solvent Machines
HP & HL 800Series
The HP & HL 800 series offers exceptional cleaning, economically and ecologically in the 35-90 pound load capacities (see specifications) with a wide or narrow footprint to properly accommodate your needs for installation.
- Multi-stage solvent/water separation system.
- Large-access loading door.
- Cyclonic Airflo™ basket
- Dialog™ Computer with Dialog Plus™.
- Front digital solvent/air temperature display panels.
- Easy front access to electronics, computers and still control components.
- Two/three holding/transfer tanks with a slanted base, LED illuminated sight glasses (optional).
- Sensor Plus™ to prevent foaming and bacteria growth during the distillation process.
- Illuminated front sight glass for still and basket solvent washdown inlet.
- Optional solvent heating and Unibet feature available.
- Optional LED front-loading door light, idiomatic still cleaning system with an optional rake.
- Union’s I-Connect system (optional) allows remote viewing of the machine’s operation and data logging.
- All electronic components are ETL-listed.
AM16 Base Door Type Commercial Dishwasher
Engineered to deliver our legendary Hobart Clean with less labor and the industry’s best lifetime value, the AM16 dish machine is loaded with thoughtful technology and features designed to revolutionise your dish-room performance, efficiency, and productivity for the long haul. Available in standard height and tall.
ANGEL 2.0
Shirt finisher - Single buck shirt press - Mod. Angel 2.0 Even unskilled operators can use this machine, thanks to the simple and intuitive controls, thereby reducing labour costs, while the outstanding constructive features and the high-quality finish avoid any final shirt touch-ups: energy consumption is widely reduced and the finishing quality is always incomparably high standard.
The powerful hot airflow and the two steam-heated finishing bucks with Teflon allow excellent shirt finishing in less than 30 seconds. This single buck shirt press is also equipped with a "touch screen" PLC, allowing total control of the machine, in any of its operations.
The shirt finisher is equipped with Height-adjustable, pneumatic device for sleeve tensioning with two Teflon-coated sleeve placket presses for a perfect sleeve finishing.
Available options:
- SMALL dummy (as an alternative to standard dummy)
- Short-sleeve clamping device
- Water spray gun with support and condensate tank
- Mirror
Apricuciture
Pony offers a wide range of professional irons that meets every kind of iron requirement.
Available models are:
- Senior TT, with patented Triple Touch System is the first electric steam iron with a universal handle, that’s perfectly ergonomic for both right and left-handed operators. The tapered shape of the sole guarantees flawless ironing even on hard-to-reach areas.
- Senior, same features as Senior TT, but with external micro.
- Electronic 170, with electronic control and nickel-plated sole.
- All Steam, completely steam heated, with no heating element nor thermostat.
- Baby, the entry-level iron of the range, simple and solid.
- Baby Professional, with steam control on the handle and hand protection.
- Seam Buster, narrow base with special alloy iron sole, thermos fuse protected armored heating element.
- Hand protection (against rising steam)
- Teflon shoe • Hook for iron suspension
