6-Burners Gas Cooker on 2/1 GN Gas Oven
Product No: 13718600
6-Burners Gas Cooker on 2/1 GN Gas Oven
Worktop from AISI 304 stainless steel of 20/10 thickness, front and side panels from AISI 304 stainless steel, and Scotch Brite finishing. Cast iron burners and brass burner cap, attached with a waterproof seal to the deep drawn worktop in AISI 304, with thermocouple safety valve and protected pilot flame. Compact high-efficiency 6kW triple-hole burners with 90mm diameter and 10kW with 120mm diameter. Guaranteed for life, activated by a valve cock. Gas oven with a self-stabilized flame burner positioned under the steel ribbed base and adjustable thermostat from 160° to 280°. Oven chamber from AISI 430 with 4-level supports and internal, pressed and ribbed door from stainless steel. Stainless steel Internal chimney and burner from AISI 304 stainless steel. High resistance and double-pressed handles from AISI 304 stainless steel of 20/10 thickness.
Related products
Industrial Cylinder Heated Drying Ironer
- Large surface contact with linen over an angle of 300°
- Highly polished steel, thin cylinder
- Emergency button and Main switch in one
- Finger protection and emergency button for more safety
- Durable Meta Aramid ironing belts
- Extra heavy press roller for high-quality ironing
- Patented direct drive – maintenance-free – system
- Patented central suction system with maintenance-free operation
- Automatic cool down
- Easy to operate microprocessor MCX
- Frequency-controlled motor
- Indication of ironing speed and temperature
- Space-saving installation against the wall is possible: front return
- Exhaust outlet at the back of the machine
- Electric or gas heating
- Metal fibre premix burner (for Gas only)
- Ergonomic design
- Overheating check system (OCS) with 3 temperature sensors
- Adjustable exhaust flap
- Exhaust output on the right
Barrier Washer
• Freestanding, high spin
• Complete stainless-steel cabinet
• Xcontrol FLEX Plus
• Stainless steel drum and tub
• Large drain valve (Ø 76 mm)
• Easy access to all important parts from all sides
• Large door opening for easy loading & unloading
• Automatic door positioning
• Easy Soap – liquid soaps connection
• External lubrication system
• Patented inner door lock
Washer Extractor
- Freestanding, high spin
- Large drain valve 2x Ø 76 mm
- Easy access to all parts
- Frequency-controlled motor
- Large door opening for easy loading and unloading.
- XControl FLEX Plus
- Power Wash® perforated lifting ribs: better washing results, lower water consumption
- Eco washing programmes – significantly reduces water and electricity consumption
- Soap dispenser with 5 removable compartments
- Cascade drum
- RS485 & USB plug
- Designed with focus on ergonomy
- Golden lock – patented inner door lock mechanism
- Pullman drum available
Professional Cylinder Heated Ironer
- Large surface contact with linen over an angle of 3000
- High polished steel, thin cylinder
- Finger protection and emergency button for more safety
- Durable Meta Aramid ironing belts
- Automatic cooldown
- Easy to operate microprocessor: 20 pre-set ironing programs
- Indication of ironing speed and temperature
- Reverse mode possible
- Frequency-controlled motor
- Easy to remove lint filters
- Space-savings installation against the wall is possible: front return
- Electric gas, or steam heating
- Overheating check system (OCS) with 3 temperature sensors
- Ergonomic design
Chest Heated Ironer – Two Rolls
- Single piece super flexible laser welding chest has 180-206° wrap-up contact to rolls
- Self-adjusted chest applies uniform pressure over the entire width and length of the roll.
- Heated by circulated thermal oil moving in the chest ensures uniform temperature along the full chest width avoiding overheated spots.
- Self-contained thermal oil heating and circulation system provide accurate temperature control, easy installation, and start-up
- Steam heated by steam injection directly into the chest
- 80 cm long self-positioning heated bridge avoids linen cooling or rolling
TPA
Seam opening tables with shapes. Manual adjustable height from 750 to 930 mm. The TPA features thermostatically adjustable electric board heating, powerful built-in vacuum and vacuum exhaust.
Available in the following versions:
- TPA-P: with leg seam-opening shape, with trousers flipping device and iron rest.
- TPA-M: with sleeve seam opening shape, with sleeve flipping device and iron rest.
- Steam iron assembly with seam-opening iron and iron rest.
- Pneumatic device for leg tensioning.
- Placing a small steam generator with iron and iron rest will allow to have a self-contained unit.
