Trousers Press
A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers.
Available in 3 versions:
- PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
- Lower buck with live steam, vacuum and air-blowing upon request
- Upper buck with live steam
- Built-in vacuum motor
- Pneumatic-clamping device for waistline locking
- Electronic board with 10 memorized programs
- Automatic cycle when closing the upper buck
- Ready for connection to external steam and air supplies.
- PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
- DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
- Lower buck with live steam, vacuum and air-blowing upon request
- Upper buck with live steam
- Built-in vacuum motor
- Electronic board
- Ready for connection to external steam and air supplies.
- 9 or 20 litters boiler
- Blowing device for the lower buck
- Steam iron assembly and safety device.
Vaporetta
Vacuum and up-steaming range of tables “VAPORETTA” has been appreciated and acknowledged as "historical" product in the Pony range for many years now. It has been completely re-designed to meet the most modern ironing needs. This range of tables stands out for its copious and well distributed steam from the board, which combined with its powerful vacuum makes the "Vaporetta" range highly versatile and performing equipment. Vaporetta is manufactured in four versions.
Self-contained models:
- Model VB with board size 1200x380mm – small end 250mm, available with the following boiler capacity: 5lt (6 kW), 9lt (6 or 8 or 10 or 12 kW), 20 lt (10 or 12 kW)
- Model VB Maxi with board size 1300x500mm – small end 250mm, available with the following boiler capacity: 9lt (6 or 8 or 10 or 12 kW), 20 lt (10 or 12 kW)
- Model VC with board size 1200x380mm – small end 250mm
- Model VC Maxi with board size 1300x500mm – small end 250mm
- Twin heating elements (only for 20-lt boiler)
- Steam or steam/air spotting gun
- Water spray gun with support
- Arm with sleeve-ironing shape, topper shape or spotting shape
- Overhead gantry available with or without pulley and iron suspension, with or without light
- Additional set of pedals.
